Free mock exam
Electrical Design — EV Charging Installation Practice
Free topic-focused mock exam: 30 random questions from a pool of 35 on Electrical Design, drawn from the wider EV Charging Installation bank. 35-minute timer, 70% to pass, worked explanation on every question. Use this when you've taken the full mock once and want to drill the topics you got wrong.
- Questions
- 30
- Time limit
- 35 min
- Pass mark
- 70% · 21/30
- Question bank
- 35
Free, no sign-up. Retake as many times as you like — different questions each time.
Sample questions
01What is the minimum copper cable cross-sectional area typically used for a 32A EV charging point on a domestic radial circuit?
- A2.5mm²
- B4mm²
- C10mm²
- D6mm²
Why: 6mm² copper is typically selected for a 32A EV charge point so the current-carrying capacity and voltage drop requirements of BS 7671 are met for the installation method and route length.
02What is a commonly specified minimum IP rating for outdoor wall-mounted EV charging equipment?
- AIP67
- BIP54
- CIP44
- DIP65
Why: IP54 is a common minimum for outdoor EV charging enclosures, giving protection against dust and splashing water; many units exceed this.
03Which cable type is most suitable for a buried supply to an EV charging installation?
- AFP200
- BPVC/PVC twin and earth
- CMICC
- DSWA
Why: Steel Wire Armoured (SWA) cable provides the mechanical protection needed for direct burial and outdoor supply runs to charge points.
Common questions
Is the Electrical Design mock exam free?
Yes — 100% free, no sign-up needed. Questions are pulled at random from a substantial bank, with a worked explanation on every question after you submit.
Can I retake the mock exam?
Yes. Every attempt picks a different random selection and reshuffles the options, so each retake gives you genuinely new questions. No limit on retakes.
Does this count towards the real qualification?
No — this is independent practice material. To gain the actual qualification you need to sit the official assessment through an approved provider.