Emergency light non-maintained electrical symbol BS EN 60617 — what it represents, where it appears in UK electrical drawings, and how it relates to the rest of the symbol library.
Free for 7 days · No charge until day 8 · Cancel anytime · Used by 1,000+ UK electricians
Written and reviewed by Andrew Moore, founder of Elec-Mate, against BS 7671:2018+A4:2026, IET Guidance Note 3 and the IET On-Site Guide.
1,000+
UK electricians
“Replaced three separate apps with Elec-Mate. Certs, quotes, and scheduling all in one place.”
Daniel Palmer — DP Electrical
A non-maintained emergency light to BS 5266. Off in normal use; switches on automatically when the mains supply fails. Tested monthly and annually per BS 5266-1.
Used in: Escape routes, stairwells, plant rooms, kitchens, places of assembly.
See all lighting symbols →Right-click the symbol above to save the SVG, or use the AI Diagram Builder to drop it into a working drawing.
A non-maintained emergency light to BS 5266. Off in normal use; switches on automatically when the mains supply fails. Tested monthly and annually per BS 5266-1.
Escape routes, stairwells, plant rooms, kitchens, places of assembly.
For the full set of lighting symbols, see the Lighting Symbols reference page — covering every related symbol with the same level of installation context.
The Elec-Mate Diagram Builder gives you every BS EN 60617 symbol on a draggable canvas — perfect for EIC schedules, EICR observation diagrams…
Open the Diagram Builder
16 certificate types, 70+ calculators, RAMS, quoting, invoicing, AI agents, and 46+ training courses — from £6.99/mo.
Start free trialOther lighting symbols you may need on the same drawing:
A ceiling-mounted light suspended on a flex or chain from a rose. The most common domestic light fitting — drawn as a circle with a cross.
Used in: Living rooms, bedrooms, dining rooms, hallways; the default UK domestic light point.
See all lighting symbols →
A flush-mounted ceiling light — the fitting sits directly against the ceiling rather than suspended. Common in kitchens, bathrooms and low-ceiling rooms.
Used in: Kitchens, bathrooms, hallways with low ceilings, loft conversions.
See all lighting symbols →
A recessed downlight set into the ceiling void. Fire-rated downlights are required where they breach a fire-rated ceiling (e.g. flats, loft conversions, above habitable rooms).
Used in: Kitchens, bathrooms (zone-rated), corridors, retail; the modern UK lighting default.
See all lighting symbols →
A wall-mounted light fitting. Symbol drawn against the wall line of the plan. Often used with dimming or two-way switching for ambience.
Used in: Bedrooms (bedside), living rooms, hallways, staircases, restaurants.
See all lighting symbols →
A robust enclosed light fitting designed for outdoor or utility use. Typically IP65 with a polycarbonate diffuser. Common with integrated PIR sensor for security.
Used in: External walls, garages, sheds, plant rooms, communal stairwells.
See all lighting symbols →
An external light fitting, typically IP44 or higher. Includes wall lights, post lights, ground-mounted spike spots, soffit downlights and porch lights.
Used in: Front and rear of houses, gardens, pathways, garages; usually with PIR or photocell control.
See all lighting symbols →
A passive infrared sensor that detects movement and switches connected lights on. Separate from a PIR switch — the sensor is the input to a relay or control module.
Used in: Security lighting, corridors with extended throw, large rooms with multiple zones.
See all lighting symbols →A non-maintained emergency light to BS 5266. Off in normal use; switches on automatically when the mains supply fails. Tested monthly and annually per BS 5266-1.
Used in: Escape routes, stairwells, plant rooms, kitchens, places of assembly.
See all lighting symbols →
A self-contained emergency luminaire with two adjustable spotlights and an internal battery. Provides high-output emergency illumination of escape routes on mains failure.
Used in: Open-plan offices, retail floors, plant rooms, warehouses, large halls.
See all lighting symbols →
A maintained or non-maintained emergency exit sign to BS EN 1838. Indicates the direction of escape; runs on battery during mains failure for at least 3 hours per BS 5266.
Used in: Above doors on escape routes, change-of-direction points, top of staircases.
See all lighting symbols →
A linear fluorescent or LED-batten fitting. Most modern installations now use LED battens — same symbol applies. Lamp length specified separately (typically 1.2 m or 1.5 m).
Used in: Garages, plant rooms, workshops, kitchens, commercial corridors, retail back-of-house.
See all lighting symbols →
A linear LED tape or strip light. Requires a constant-voltage driver (usually 12 V or 24 V DC). Often dimmable via the driver or via 0-10V / DALI control.
Used in: Under-cabinet kitchens, cove lighting, stairs, bathroom mirrors, retail display shelves.
See all lighting symbols →
A high-output LED or HID light fitting designed for high-ceiling industrial spaces (typically 6-15 m mounting height). Wide-beam or narrow-beam reflectors depending on layout.
Used in: Warehouses, factories, gymnasiums, indoor sports halls, large retail spaces.
See all lighting symbols →Verified reviews from the UK App Store.
Elec-Mate is my go to app for business and electrical work. It's feature rich without feeling cluttered. A true all in one app for quotes, certs, calculations, RAMS, EICRs, and more. I use it every day without fail, and it makes my workflow much smoother since I'm not jumping between apps anymore. The price-to-feature ratio is excellent. Any issues I've had, the developer responds within the hour and usually fixes them the same day. 100% recommend.
I've used the app and the web based version for a while now and it's well worth the investment. If you're an apprentice or experienced Spark give it a go, you won't be disappointed.
I've been using Elec-Mate for a while now, and honestly, it's one of the best apps I've ever downloaded. Every aspect of it feels thoughtfully designed, from the clean and intuitive interface to the powerful features that make everything so easy to manage. It's clear that a lot of care and attention went into building this app, and it shows in every detail.
Real feedback from real sparks
“Replaced three separate apps with Elec-Mate. Certs, quotes, and scheduling all in one place.”
Daniel Palmer
Sole Trader · DP Electrical
“I've won two contracts this month because I could turn quotes around same-day with the AI cost engineer.”
Nathan Perry
Electrician · NP Electrical Services
“The study centre got me through my AM2. Mock exams and flashcards are brilliant.”
Jake Pizey
3rd Year Apprentice · Apprentice
Drag and drop BS EN 60617 symbols into circuit diagrams, EICR observation drawings, and EIC distribution schedules. 7-day free trial.
“Replaced three separate apps with Elec-Mate. Certs, quotes, and scheduling all in one place.”
Daniel Palmer, DP Electrical
From £6.99/mo after trial — less than a coffee a week
We use cookies to improve the app and measure what works. Cookie Policy