YEAR 4 APPRENTICE

Year 4 Electrical Apprentice: Complete Revision Plan — Units, Skills & Assessments

A complete revision plan for fourth-year electrical apprentices. Year 4 is dominated by the AM2 end-point assessment, NVQ portfolio completion, and the start of the working-electrician career. This page maps the year to specific Elec-Mate unit revision pages and tools, so you can prioritise what to study next.

Free for 7 days · No charge until day 8 · Cancel anytime · Used by 1,000+ UK electricians

11 min readUpdated 2026-05-18Andrew Moore, Founder of Elec-Mate

Written and reviewed by Andrew Moore, founder of Elec-Mate, against BS 7671:2018+A4:2026, IET Guidance Note 3 and the IET On-Site Guide.

ShareXinW
Follow

1,000+

UK electricians

“Replaced three separate apps with Elec-Mate. Certs, quotes, and scheduling all in one place.”

Daniel Palmer — DP Electrical

Key Takeaways

  • 1Typical Year 4 qualifications: 5357 end-point AM2 (apprenticeship standard pathway), 2357 NVQ completion, JIB grading interview.
  • 2Assessment focus this year: AM2 end-point assessment — pass it and the apprenticeship is complete. JIB Approved Electrician application follows..
  • 3Year 4 core unit areas cover 4 main themes — listed in full below.
  • 4Year 4 key practical skills cover 7 on-site / bench-based competencies.
  • 5Year 4 progression depends on completing both college units AND on-site portfolio evidence (where NVQ-based).
  • 6Use Elec-Mate’s apprentice dashboard to track your progress against every Year 4 unit and the AM2 milestones.
01 · Year 4 Apprentice

Core Unit Areas Covered in Year 4

Year 4 of a UK electrical apprenticeship typically covers these main unit areas. Exact unit titles vary by awarding body and qualification — use the linked unit revision pages for the specific qualification you are on.

  1. NVQ portfolio completion (Level 3 NVQ 2357 or 5393-03 evidence).
  2. AM2 end-point assessment preparation.
  3. Workplace-led learning + observed practice.
  4. Professional development planning.
02 · Year 4 Apprentice

Key Practical Skills for Year 4

These are the practical / calculation / certification skills you should be confident with by the end of Year 4. Build them on the college bench, on site, and through Elec-Mate’s tools.

  • AM2 Section A timed practice.
  • AM2 Section B safe isolation under observation.
  • AM2 Section C complete bench install.
  • AM2 Section D continuity and IR testing.
  • AM2 Section E initial verification + EIC completion.
  • AM2 Section F fault diagnosis under time pressure.
  • AM2 Section G industry-knowledge written.
03 · Year 4 Apprentice

A Suggested Month-by-Month Plan

Below is a typical Year 4 rhythm. Adjust to your specific college block schedule and on-site rotation.

  1. Months 1-2: Orientate with the college handbook. Read every unit specification in full. Open the matching Elec-Mate unit revision page and self-rate every topic.
  2. Months 3-4: Bench-focused practical work. Use OJT hours wisely — record everything in your portfolio (Elec-Mate auto-logs this).
  3. Months 5-6: First mid-year assessments. Use mock exams to find weak topics. Re-revise the 1s and 2s on your topic self-rating.
  4. Months 7-9: Theory-heavy block. BS 7671 navigation, electrical science, design or fault diagnosis depending on year.
  5. Months 10-11: Final assessments and end-of-year exam window. Light review, plenty of rest, and one final mock per unit.
  6. Month 12: Transition to next year — close off the current year’s portfolio, review weak areas with your tutor, prepare for the next block.

Practise with unlimited mock exams

AI-generated mocks, instant marking, and explanations on every question — targeted at your weakest topics. From £6.99/mo.

Start practising free
Download on the App StoreGet it on Google Play
04 · Year 4 Apprentice

Study Year 4 With Elec-Mate

The Elec-Mate apprentice tier is built specifically for UK electrical apprentices in Year 4. Unit-by-unit revision content, mock exams, flashcards, OJT tracking, and a tutor-shared dashboard so your college can see your progress in real time.

For Year 4 apprentices

Try the Year 4 dashboard free for 7 days. See your progress against every unit, every mock exam, and every AM2 section. Cancel anytime.

A Five-Step Year 4 Revision Approach

Use this approach every term to stay on top of Year 4.

1

Map your year onto the Elec-Mate unit revision pages

Find your qualification + units in our unit-by-unit revision library. Bookmark every page you will study this year.

2

Self-rate every topic and identify priorities

For each unit, work through the Elec-Mate topic checklist and rate yourself 1-5. The 1s and 2s become your revision priorities.

3

Build a weekly study habit

Aim for 4-6 hours of focused revision per week during college blocks. Short sessions on the train to site work surprisingly well — use the flashcard mode.

4

Run mock exams a month before the real ones

Elec-Mate mocks mirror the real exam timings and weighting. Use them to find weak topics with enough time to re-revise.

5

Log every hour of OJT in your portfolio

Off-the-job training hours are a regulatory requirement for the apprenticeship — and the NVQ portfolio is where they are evidenced. Use Elec-Mate’s OJT logger so your tutor and assessor have everything they need.

Frequently Asked Questions

What electricians say

Verified reviews from the UK App Store.

One App for Everything!

Elec-Mate is my go to app for business and electrical work. It's feature rich without feeling cluttered. A true all in one app for quotes, certs, calculations, RAMS, EICRs, and more. I use it every day without fail, and it makes my workflow much smoother since I'm not jumping between apps anymore. The price-to-feature ratio is excellent. Any issues I've had, the developer responds within the hour and usually fixes them the same day. 100% recommend.

Apple App Store · GBR

Fantastic app for electricians

I've used the app and the web based version for a while now and it's well worth the investment. If you're an apprentice or experienced Spark give it a go, you won't be disappointed.

Apple App Store · GBR

Absolutely amazing

I've been using Elec-Mate for a while now, and honestly, it's one of the best apps I've ever downloaded. Every aspect of it feels thoughtfully designed, from the clean and intuitive interface to the powerful features that make everything so easy to manage. It's clear that a lot of care and attention went into building this app, and it shows in every detail.

Apple App Store · GBR

Trusted by electricians across the UK

Real feedback from real sparks

“Replaced three separate apps with Elec-Mate. Certs, quotes, and scheduling all in one place.”

Daniel Palmer

Sole Trader · DP Electrical

“I've won two contracts this month because I could turn quotes around same-day with the AI cost engineer.”

Nathan Perry

Electrician · NP Electrical Services

“The study centre got me through my AM2. Mock exams and flashcards are brilliant.”

Jake Pizey

3rd Year Apprentice · Apprentice

7-Day Free Trial — Cancel Anytime, No Hassle

For Year 4 Apprentices: Track Every Unit on Your Phone

Join 1,000+ UK apprentices using Elec-Mate for unit revision, mock exams, OJT tracking and tutor-shared progress. 7-day free trial.

“Replaced three separate apps with Elec-Mate. Certs, quotes, and scheduling all in one place.”

Daniel Palmer, DP Electrical

From £6.99/mo after trial — less than a coffee a week

or download the app
Download on the App StoreGet it on Google Play
7 days free, then from £6.99/moCancel in one tap — no calls, no hassleiOS, Android & WebBS 7671 compliant
16
Certificate Types
70+
Calculators
46+
Training Courses
8
AI Agents

1,000+ electricians · From £6.99/mo after trial

We use cookies to improve the app and measure what works. Cookie Policy